3412.50 $ American Made 4 Post Lift New W/warranty - Tools - By Dealer - Sale Pacific City

Published date: September 12, 2017
  • Location: Pacific City, Oregon, United States

American Made 4 Post Lift New W/warranty - Tools - By Dealer - Sale


⭕ Four Post Lifts
The finest and safest parking lift available!
Bigger, beefier columns
Locks are inside, out of harms way
Pulleys are inside, out of harms way
Cables are inside, out of harms way
Sliders and grease are inside, out of harms way
NO pinch points outside the column!
Cables pull from the center of the column and load vehicle weight on all 4 sides of the column
Powder coat finish
Dust covers keep grease clean
Cleaner looking column
Longer approach ramps for lower vehicles
Slider blocks are twice the size of any other lift
Safest parking lift available (see independent test)
Threaded lock rods (NO cotter pins here!)
10 lock stop positions
Outweighs most all others by 400lbs (shipping weight 1920lbs)
7000lb capacity
80% pre-assembled
One piece formed runway! (No butt-welds)
Why stand or work under anything less??


Phone number ✆ +1 458-937-6666

Pacific City, Oregon

Contact seller Share

Related listings

  • Kobalt 20 Gallon Air Compressor, 150 Psi - Tools - By Owner - Sale
    TOOLS - Government Camp (Oregon) - September 2, 2017 91.67 $

    Kobalt 20 Gallon Air Compressor, 150 Psi - Tools - By Owner - Sale ⭕ This compressor has low use. It comes with a hose, air Chuck, pressure gauge, needle valve, and blower end. Made by Kobalt. 20 gallon, 1.8 hp. 4.0 cfm. 150 psi max. 110 volts Ready ...

  • Superior Tool ST 2000 Proline Pipe Cutter - Tools - By Owner - Sale
    TOOLS - Huntington (Oregon) - September 1, 2017 29.17 $

    Superior Tool ST 2000 Proline Pipe Cutter - Tools - By Owner - Sale ⭕ New Superior Tool ST 2000 Proline Pipe Cutter 5/8 - 2-1/8 ( 16mm - 54mm ) Set of 2 Replacement Proline Cutter Wheels Phone number ✆ +1 541-112-8770 Huntington, Oregon

  • Norton Cut Off Wheels (12 X 3/32 X 1-1/4)(Lot Of 5) - Tools - By Owner - Sale
    TOOLS - Oceanside (Oregon) - August 22, 2017 18.33 $

    Norton Cut Off Wheels (12 X 3/32 X 1-1/4)(Lot Of 5) - Tools - By Owner - Sale ⭕ Norton Cut Off Wheels (12 X 3/32 X 1-1/4)(Lot of 5) 12 X 3/32 X 1-1/4 NC1978 8/82 B659282-1 MAXIMUM SAFE SPEED 5095 R.P.M MADE IN U.S.A. WORCHESTER MASSACHUSETTS SANTA CL...

  • Hilti TE25 Rotary Hammer Drill - Tools - By Owner - Sale
    TOOLS - Wasco (Oregon) - August 21, 2017 140.83 $

    Hilti TE25 Rotary Hammer Drill - Tools - By Owner - Sale ⭕ I have a Hilti TE25 Rotary Hammer Drill for sale. It comes with a hard case and a few bits. It works well but I no longer need it. Asking $169 thanks for looking! Phone number ✆ +1 541-911-64...

  • Scalffold 5' - Tools - By Owner - Sale
    TOOLS - Yoncalla (Oregon) - August 20, 2017 20.83 $

    Scalffold 5' - Tools - By Owner - Sale ⭕ 5 scaffold frame. I have 83 individual ends You can buy 1 or buy them all. I have no X bracing just the ends. I am asking $25 for each frame. In great shape. Phone number ✆ +1 503-267-4680 Yoncalla, Oregon

  • Craftsman Bench Top Drill Press..8 - Tools - By Owner - Sale
    TOOLS - Adams (Oregon) - August 18, 2017 33.33 $

    Craftsman Bench Top Drill Press..8 - Tools - By Owner - Sale ⭕ What you see is what you get..The plastic part that is circled(in blue) is cracked,can buy the part cheap(less then 10.00)..Still works like it is,so not sure what it is does.. Phone numb...

  • Briggs & Stratton Portable Generator For Sale - $600 (Clifton) - Tools - By Owner - Sale
    TOOLS - Brogan (Oregon) - August 18, 2017 500.00 $

    Briggs & Stratton Portable Generator For Sale - $600 (Clifton) - Tools - By Owner - Sale ⭕ Good condition Briggs & Stratton Portable Generator. Never used. Only started a few times to run. Both tires are flat. One may just need air. Other needs repla...

  • NEW RIDGID CIRCULAR SAW - Tools - By Owner - Sale
    TOOLS - Boring (Oregon) - July 31, 2017 62.50 $

    NEW RIDGID CIRCULAR SAW - Tools - By Owner - Sale ⭕ New 6 1/2 Ridgid circular saw. $75 Call if interested. Will not answer email or text. Phone number ✆ +1 458-149-6079 Boring, Oregon

  • JOB BOX - Tools - By Owner - Sale
    TOOLS - Warren (Oregon) - July 29, 2017 208.33 $

    JOB BOX - Tools - By Owner - Sale ⭕ Job box for sale with locks. 4 long, 2 wide, 28 tall. $250 Call if interested. Phone number ✆ +1 458-887-1682 Warren, Oregon

  • Craftsman Hacksaw - Tools - By Owner - Sale
    TOOLS - Walton (Oregon) - July 28, 2017 5.83 $

    Craftsman Hacksaw - Tools - By Owner - Sale ⭕ New craftsman hacksaw 12in Phone number ✆ +1 458-196-8450 Walton, Oregon

  • Milwaukee M18 Drill Driver - Bare Tool - Like New - Tools - By Owner - Sale
    TOOLS - Harper (Oregon) - July 28, 2017 37.50 $

    Milwaukee M18 Drill Driver - Bare Tool - Like New - Tools - By Owner - Sale ⭕ Milwaukee M18 Drill Driver - Bare Tool - Like New. No battery or charger. Great way to add to your set or replace your worn out drill / driver. Asking $45.00. Click on the ...

  • Ryobi 6.2 Amp 5/8 In. Variable Speed Reversible Hammer Drill - Tools - By Owner - Sale
    TOOLS - Paisley (Oregon) - July 15, 2017 25.00 $

    Ryobi 6.2 Amp 5/8 In. Variable Speed Reversible Hammer Drill - Tools - By Owner - Sale ⭕ Good Condition Works Great Phone number ✆ +1 458-993-8054 Paisley, Oregon

  • LINCOLN WELDER SOLID COPPER WINDINGS 222.00 OBO - Tools - By Owner - Sale
    TOOLS - Pacific City (Oregon) - July 13, 2017 222.00 $

    LINCOLN WELDER SOLID COPPER WINDINGS 222.00 OBO - Tools - By Owner - Sale ⭕ Round top welder ,has steel wheels,50 foot of leads,240 volt,for welding with rods.To reverse polarity just swap leads.This one has solid copper windings.Not copper clad like...

  • Blackhawk Bi-pod Heavy Duty Screw Jack - Tools - By Owner - Sale
    TOOLS - Corvallis (Oregon) - July 12, 2017 25.00 $

    Blackhawk Bi-pod Heavy Duty Screw Jack - Tools - By Owner - Sale ⭕ This is a heavy duty jack - great for commercial or farm use Phone number ✆ +1 971-308-7418 Corvallis, Oregon

  • Kennedy Tool Box With Machinery Tools & 200+ Drill Bits - Tools - By Owner - Sale
    TOOLS - Elgin (Oregon) - July 11, 2017 1000.00 $

    Kennedy Tool Box With Machinery Tools & 200+ Drill Bits - Tools - By Owner - Sale ⭕ Selling the lot all together 1000 obo Very cool vintage machinery tools and gagets. Some are Starrett and in original boxes with papers. Also included are over 200 dr...

  • Scaffolding Wheels - Tools - By Owner - Sale
    TOOLS - Medford (Oregon) - July 10, 2017 75.00 $

    Scaffolding Wheels - Tools - By Owner - Sale ⭕ i have 8 scaffolding wheels that i will sell at $20 a piece or 4 for $75, they are grease able and have breaks Phone number ✆ +1 541-975-2934 Medford, Oregon

  • CRAFTSMAN -AIRCOMPRESSOR - Tools - By Owner - Sale
    TOOLS - Pacific City (Oregon) - July 10, 2017 180.00 $

    CRAFTSMAN -AIRCOMPRESSOR - Tools - By Owner - Sale ⭕ CRAFTSMAN 6.5 HP 33 GAL. PORTABEL AIR COMPRESSOR --LIKE NEW----$180 Phone number ✆ +1 541-886-2135 Pacific City, Oregon

  • Saw-Milwaukee Circular Saw 7-1/4 Tilt-Lok 6390-20 - Tools - By Owner - Sale
    TOOLS - Glide (Oregon) - July 8, 2017 75.00 $

    Saw-Milwaukee Circular Saw 7-1/4 Tilt-Lok 6390-20 - Tools - By Owner - Sale ⭕ In good condition, I have a Milwaukee 6390-20 7-1/4 inch Tilt-Lok Circular Saw. Asking $75 Cash. Does not come with a case. Please respond to this ad with any questions. Th...

  • Troy Bilt (FLEX) - Tools - By Owner - Sale
    TOOLS - Sheridan (Oregon) - July 8, 2017 1.00 $

    Troy Bilt (FLEX) - Tools - By Owner - Sale ⭕ Troy bilt (FLEX) multi tools, all new, Bought from lowes, snow blower, power washer, two power units, lawn mower, Flex bench, blower leaf, all new, make offer Phone number ✆ +1 458-242-2397 Sheridan, Orego...

  • SNAPPER SNOW BLOWER/THROWER - Tools - By Owner - Sale
    TOOLS - Powers (Oregon) - July 6, 2017 600.00 $

    SNAPPER SNOW BLOWER/THROWER - Tools - By Owner - Sale ⭕ BRIGGS & STRATTON ENGINE - 2-STAGE? - WITH BRIGHT LIGHT 6 FORWARD AND 2 REVERSE SPEEDS - NO NEED TO PUSH OR PULL PUSH BUTTON START (ELECTRONIC) OR PULL TO START MINIMALLY USED - GREAT CONDITION ...

  • CHAIN FALL (HOIST) - Tools - By Owner - Sale
    TOOLS - Oceanside (Oregon) - July 6, 2017 40.00 $

    CHAIN FALL (HOIST) - Tools - By Owner - Sale ⭕ 1 TON CHAIN FALL WORKS AS EXPECTED I JUST DONT USE IT ANYMORE................................. $40 OR BEST OFFER IF THIS IS POSTED IT IS STILL FOR SALE Phone number ✆ +1 503-921-1112 Oceanside, Oregon

  • Black Max 3600\4500 Watt Portable Generator - Tools - By Owner - Sale
    TOOLS - Yachats (Oregon) - July 5, 2017 300.00 $

    Black Max 3600\4500 Watt Portable Generator - Tools - By Owner - Sale ⭕ This generator still packed in original packaging and has never been opened. Full 2 yr factory warranty upon registering. 208cc motor, 4 gal gas tank with 10 hr run time at 50%. ...

  • Duff Industrial 10 Ton Jacks - Tools - By Owner - Sale
    TOOLS - Fall Creek (Oregon) - July 5, 2017 150.00 $

    Duff Industrial 10 Ton Jacks - Tools - By Owner - Sale ⭕ Duff 10 ton industrial Jacks. In good condition for age. Phone number ✆ +1 541-365-8288 Fall Creek, Oregon

  • 90 Amp Flux Wire Welder
    TOOLS - Azalea (Oregon) - May 20, 2017 50.00 $

    90 Amp Flux Wire Welder ⭕ Brand new, never used, Harbor Freight 90 amp flux wire portable welder. Never taken out of the box. $50 firm. Cash only, no trades, no calls, text or email only. If the ad is up, its still for sale. Local phone numbers only!...

  • Auto Rotisserie (Heavy Duty)
    TOOLS - Scotts Mills (Oregon) - May 19, 2017 1200.00 $

    Auto Rotisserie (Heavy Duty) ⭕ This high quality/well built rotisserie is heavy duty and has off road rubber tires that are great for rolling on trailers, gravel, grass, etc. Its height and length are adjustable. Has 3 ton jacks at each end. It also ...

  • Circular Saws, Sander, Skilsaw
    TOOLS - Mount Angel (Oregon) - May 18, 2017 25.00 $

    Circular Saws, Sander, Skilsaw ⭕ 2 saws and sander. All work great. $25 for all. OBO. Phone number ✆ +1 503-777-2968 Mount Angel, Oregon

  • Builders Edge 12x18 Replacement Air Vents
    TOOLS - Idanha (Oregon) - May 17, 2017 45.00 $

    Builders Edge 12x18 Replacement Air Vents ⭕ I have two Builders Edge 12x18 Replacement Air Vents for sale. Each one is $25. You can have both for $45. This is a cash transaction only. I WILL NOT accept checks, credit cards, or debit cards. If you are...

  • Bandsaw
    TOOLS - Sutherlin (Oregon) - May 15, 2017 500.00 $

    Bandsaw ⭕ Johnson bandsaw 3/4 hp 120volt cutting capacity 10in x18in Phone number ✆ +1 541-480-9758 Sutherlin, Oregon

  • Complete Wood Working Shop For Sale Moving Must Sell
    TOOLS - Enterprise (Oregon) - May 13, 2017 1.00 $

    Complete Wood Working Shop For Sale Moving Must Sell ⭕ Up for sale is a complete woodworking shop located in Appleton WI, with a total of eleven (11) tools as follows: 1. Craftsman radial saw 10 $300.00 2. Delta Joiner 8 DJ-20 $1800.00 3. Rockwell sh...

  • Electric Snowblower
    TOOLS - Scotts Mills (Oregon) - May 12, 2017 75.00 $

    Electric Snowblower ⭕ Toro snowblower for sale. Great lil machine. We upgraded this year. Plenty of life left in it. Phone number ✆ +1 458-835-9222 Scotts Mills, Oregon

  • 7pc Brake Tool Kit
    TOOLS - Sixes (Oregon) - May 11, 2017 15.00 $

    7pc Brake Tool Kit ⭕ Repair rear and front brakes easily with this brake tool set. The set includes two offset box end wrenches and one 8mm x 10mm box end wrench with 90 degree bend for easy access to most bleeder fittings. The set also includes a to...

  • Seed Spreader Or Fertizler Spreader
    TOOLS - Culp Creek (Oregon) - May 9, 2017 15.00 $

    Seed Spreader Or Fertizler Spreader ⭕ seed spreader or fertizler spreader if interested text me at pam Phone number ✆ +1 458-877-2838 Culp Creek, Oregon

  • Makita 5800 Watt Generator And 11HP (Works Good)
    TOOLS - Kent (Oregon) - May 7, 2017 1025.00 $

    Makita 5800 Watt Generator And 11HP (Works Good) ⭕ Hello I am selling a nice working Makita G5710R Generator and 11HP. It Starts in 1 Pull. Its 11HP and very Powerful. Its 5800 Watt Generator. Its like a Honda Generator. Made in Japan.... Its like Ne...

  • Sander
    TOOLS - Elgin (Oregon) - May 7, 2017 40.00 $

    Sander ⭕ I have two for sale Phone number ✆ +1 458-320-6370 Elgin, Oregon

  • Flouren Watch Repair Tool Kit
    TOOLS - Junction City (Oregon) - May 7, 2017 15.00 $

    Flouren Watch Repair Tool Kit ⭕ OBO. Hardly used. Great for watchband adjustment, opening watch backs, changing batteries, bands and gaskets. Spring bar remover for strap and adjustable case opener. Can open waterproof cases up to 1.3 Phone number ✆ ...

  • Matco Flare Nut Crows Foot Set
    TOOLS - Days Creek (Oregon) - May 7, 2017 100.00 $

    Matco Flare Nut Crows Foot Set ⭕ Matco tools flare nut crows foot set 10 pieces 10mm-19mm in plastic case like new $100 Phone number ✆ +1 458-603-1506 Days Creek, Oregon

  • Craftsman Lathe
    TOOLS - Gilchrist (Oregon) - May 6, 2017 350.00 $

    Craftsman Lathe ⭕ lathe with copier and heavy-duty bench. asking $350 obo. Call or text Phone number ✆ +1 541-614-5903 Gilchrist, Oregon

  • 12' FG Ladder First $199
    TOOLS - Bonanza (Oregon) - May 5, 2017 199.00 $

    12' FG Ladder First $199 ⭕ 12 Fiber Glass Ladder first $199 300 lb rating, excellent cond Pike Creek zip code 19808 price has been reduced and is firm... $199 Phone number ✆ +1 541-754-9451 Bonanza, Oregon

  • Kosta Safety Glasses
    TOOLS - Prineville (Oregon) - May 5, 2017 2.00 $

    Kosta Safety Glasses ⭕ Brand new Kosta safety glasses 2.97 a piece of 10 glasses for 17 $ call text or email Joseph Thank you God bless Phone number ✆ +1 458-633-2197 Prineville, Oregon

  • Wire Rope
    TOOLS - Brownsville (Oregon) - May 5, 2017 20.00 $

    Wire Rope ⭕ 7/8 pulling wire rope for sale $20 each call or text if interested Phone number ✆ +1 541-245-5108 Brownsville, Oregon

  • IRWIN PIPE WRENCH
    TOOLS - Roseburg (Oregon) - May 5, 2017 10.00 $

    IRWIN PIPE WRENCH ⭕ QUICK ADJUSTING. Phone number ✆ +1 503-948-8403 Roseburg, Oregon

  • Brady Idexpert Label Maker
    TOOLS - Broadbent (Oregon) - May 2, 2017 100.00 $

    Brady Idexpert Label Maker ⭕ I have a Brady idexpert label maker for 100.00. Comes with hard case and a/c adapter. Works like it should. Instructions included. Joe 307.two five eight 652zero thanks Phone number ✆ +1 503-869-2706 Broadbent, Oregon

  • Metal Number Stamps
    TOOLS - Malin (Oregon) - May 1, 2017 10.00 $

    Metal Number Stamps ⭕ Vintage standard duty metal stamps. Number 0-9. Manufactured by Greenfield Steel Stamp Corp. 1/4 inch numbers. Box is a little rough but still legible. Nice set for collector or someone who might use them. Phone number ✆ +1 503-...

  • CNC Machine Time Rental
    TOOLS - Banks (Oregon) - May 1, 2017 1.00 $

    CNC Machine Time Rental ⭕ I have a 4 ft. x 8 ft CNC machine. The machine is able to cut any plastics, wood / plywood components, and even aluminum into any design or piece you need. The software it utilizes is Mach3, Vcarve Pro, Aspire. Rates as foll...

  • Dewalt Reciprocating Saw W/10 Piece Blade Kit
    TOOLS - Milton Freewater (Oregon) - May 1, 2017 70.00 $

    Dewalt Reciprocating Saw W/10 Piece Blade Kit ⭕ Dewalt battery operated saw has been used 4 times. In great shape. Am selling without battery and charger. Comes with 10 pc blade kit. In person p/u. Cash only. Phone number ✆ +1 458-554-3543 Milton Fre...

  • Craftsman 1/2 Impact Wrench
    TOOLS - Thurston (Oregon) - May 1, 2017 50.00 $

    Craftsman 1/2 Impact Wrench ⭕ Brand new craftsman 1/2 Impact Wrench. Never used Phone number ✆ +1 541-368-2114 Thurston, Oregon

  • Heavy Duty Steel Pipe Wrench, 48 Long
    TOOLS - Mount Vernon (Oregon) - April 27, 2017 35.00 $

    Heavy Duty Steel Pipe Wrench, 48 Long ⭕ For sale a heavy duty steel pipe wrench. Very large, 48 long, Pittsburg brand, hardly used, excellent condition, Only $ 35 dollars. Thanks for looking, ad will be deleted when sold. Phone number ✆ +1 971-200-51...

  • Tornado Shelter/StormShelters/ Safe Room
    TOOLS - Oakland (Oregon) - April 25, 2017 3995.00 $

    Tornado Shelter/StormShelters/ Safe Room ⭕ !!! DONT WAIT FOR THE NEXT STORM !!! Storm Shelters / Tornado Shelters / Safe Rooms Have you ever been in a situation where you didnt feel your family or you were safe from a storm? Do Tornados scare the sen...

  • Welding Helmet
    TOOLS - Foster (Oregon) - April 22, 2017 100.00 $

    Welding Helmet ⭕ Used twice Phone number ✆ +1 458-101-8773 Foster, Oregon

  • Complete Career
    TOOLS - Lake Oswego (Oregon) - April 22, 2017 2000.00 $

    Complete Career ⭕ I have an enclosed tool trailer packed with everything you will need to go straight to work and start making money new 12 inch Dewalt chop saw 10 inch craftsman tabe saw both like new circular saw drills sanders jig saw 20 ft ext.la...

  • DRILL
    TOOLS - Roseburg (Oregon) - April 22, 2017 50.00 $

    DRILL ⭕ vintage hand drill....$50.00 Phone number ✆ +1 971-478-5933 Roseburg, Oregon

  • Electrical Tools
    TOOLS - Grants Pass (Oregon) - April 20, 2017 1.00 $

    Electrical Tools ⭕ lineman tools Phone number ✆ +1 541-131-1437 Grants Pass, Oregon

  • Pack Rat Tool Box
    TOOLS - Alvadore (Oregon) - April 20, 2017 350.00 $

    Pack Rat Tool Box ⭕ Pack rat tool box has been painted black on the front. Have lots of dividers to make your own customized compartments 350 obo. Sorry had the wrong number posted Phone number ✆ +1 971-565-1601 Alvadore, Oregon

  • 10 Hp Compressor 3ph
    TOOLS - Jacksonville (Oregon) - April 18, 2017 900.00 $

    10 Hp Compressor 3ph ⭕ Works great very heavy duty. $900 or b/o Phone number ✆ +1 971-887-5382 Jacksonville, Oregon

  • Lathe/scroll Saw Combo
    TOOLS - Government Camp (Oregon) - April 18, 2017 400.00 $

    Lathe/scroll Saw Combo ⭕ I have an old style super heavy large lathe and 36 inch scroll saw. One motor runs both, along with a box of lathe blades and a good metal roll cart. Picked it up on a trade, and made a few projects with it, but honestly just...

  • Buy A 4-Post Car Lift For $2150! 2-Post For $1695! Can Install!
    TOOLS - Butte Falls (Oregon) - April 18, 2017 1.00 $

    Buy A 4-Post Car Lift For $2150! 2-Post For $1695! Can Install! ⭕ JACKS, INSTALLATION, TIRE EQUIPMENT, 4 post COMBO DEALS, DISCOUNT, SAFE, INSTALLATION 2 POST, FOUR POST, FAST DELIVERY Need More Space? Tired of working on the floor? Need a lift? The ...

  • Steel 4 Wheel Cart
    TOOLS - Garibaldi (Oregon) - April 18, 2017 25.00 $

    Steel 4 Wheel Cart ⭕ 4 wheel steel cart with rubber bumper. In excellent shape. Phone number ✆ +1 458-744-4573 Garibaldi, Oregon

  • 3phz Electric Motor
    TOOLS - Neotsu (Oregon) - April 18, 2017 100.00 $

    3phz Electric Motor ⭕ 3 phz Electric Motor 3 hp 208-230/460 Phone number ✆ +1 541-465-5011 Neotsu, Oregon

  • Huskey 25' Tape Measure
    TOOLS - Jacksonville (Oregon) - April 18, 2017 10.00 $

    Huskey 25' Tape Measure ⭕ New Huskey 25 Tape Measures $10 each Phone number ✆ +1 541-116-4351 Jacksonville, Oregon

  • Weather Guard Toolbox(Reduced)
    TOOLS - Lincoln City (Oregon) - April 18, 2017 200.00 $

    Weather Guard Toolbox(Reduced) ⭕ Great box. It needs a good cleaning. Has working lock with the key. Phone number ✆ +1 971-893-7658 Lincoln City, Oregon

  • Table Saw 8 Powercraft On Stand.
    TOOLS - Ashland (Oregon) - April 18, 2017 45.00 $

    Table Saw 8 Powercraft On Stand. ⭕ 8 table saw powercraft on stand Phone number ✆ +1 971-126-6256 Ashland, Oregon

  • Custom Signs, Decals, Logos, Stencils And Monograms
    TOOLS - Monmouth (Oregon) - April 18, 2017 1.00 $

    Custom Signs, Decals, Logos, Stencils And Monograms ⭕ Customized cuts and graphics for vinyl decals, high-quality stencils, magnets and monograms! Great for business advertisement on vehicles and store windows. Specify the project or idea and Ill cre...

  • Ridgid Table Saw
    TOOLS - Winchester (Oregon) - April 18, 2017 400.00 $

    Ridgid Table Saw ⭕ Used ts2410ls Ridgid Table Saw. Phone number ✆ +1 503-969-7420 Winchester, Oregon

  • Low Pressure Air Spray Gun
    TOOLS - Clatskanie (Oregon) - April 17, 2017 23.00 $

    Low Pressure Air Spray Gun ⭕ Heavy duty construction with adjustable spray pattern control Provides a constant, uniform finish every time Dual action trigger (air only / air & paint) Anti-drip, 1-liter polished cast aluminum siphon cup with quick-rel...

  • Right Cut Tin Snip
    TOOLS - Eagle Point (Oregon) - April 17, 2017 4.00 $

    Right Cut Tin Snip ⭕ Features: Drop forged, heat treated alloy steel jaws Serrated cutting jaws prevent slips Lever lock for safe storage Comfortable, color-coded plastic handles reduce fatigue Cuts through aluminum, sheet metal, leather, tile, aspha...

  • 2-pc. 10-1/2 Circlip Pliers Set
    TOOLS - Waldport (Oregon) - April 17, 2017 21.00 $

    2-pc. 10-1/2 Circlip Pliers Set ⭕ Features: Offset tips make it easier to install and remove circlips Removable and replaceable tips have a spring ratchet locking mechanism to hold circlips securely against tension Contents: 2-pc. 10-1/2 circlip plie...

  • 4-pc. Pry Bar Set
    TOOLS - Weston (Oregon) - April 17, 2017 18.00 $

    4-pc. Pry Bar Set ⭕ Features: Drop forged heat treated steel Tapered pointed heads are ideal for aligning Slipper foot ends allow added leverage when lifting or prying Sizes: 6 TOOL DOME 4163 HWY 27 S SEBRING FL 33870 Phone number ✆ +1 458-938-1507 W...

  • Central Florida-Storage Sheds & Barns-Distinction, Quality RENT-TO-OWN
    TOOLS - Noti (Oregon) - April 17, 2017 1.00 $

    Central Florida-Storage Sheds & Barns-Distinction, Quality RENT-TO-OWN ⭕ RENT-TO-OWN THEN IN THREE YEARS IT IS YOURS! QUALITY SHEDS AND BARNS FOR CENTRAL FLORIDA AND AREA. When you get a shed or Barn at South Country Sheds you get so much more! Visit...

  • Graco V LineLazer 5900 Asphalt Pavement Marking Striper!
    TOOLS - Madras (Oregon) - April 17, 2017 8995.00 $

    Graco V LineLazer 5900 Asphalt Pavement Marking Striper! ⭕ The LineLazer V 5900 (17H455) continues to be the mid to heavy-duty striping solution for professional pavement marking contractors who recognize the increased productivity this leader delive...

  • HUSQVARNA 20 CHAINSAW BAR!!!
    TOOLS - Eagle Creek (Oregon) - April 17, 2017 20.00 $

    HUSQVARNA 20 CHAINSAW BAR!!! ⭕ Husqvarna chainsaw bar 20 inches in great shape husky bar Phone number ✆ +1 458-316-4301 Eagle Creek, Oregon

  • Oxy/Acetylene Hose Reel
    TOOLS - Meacham (Oregon) - April 17, 2017 100.00 $

    Oxy/Acetylene Hose Reel ⭕ Brand new oxygen/acetylene hose reel. Auto winding with hose included. Bought this years ago and never used it. Includes mounts. $100 Phone number ✆ +1 541-774-6771 Meacham, Oregon

  • Craftsman Drill Grinding Attachment
    TOOLS - Brightwood (Oregon) - April 17, 2017 25.00 $

    Craftsman Drill Grinding Attachment ⭕ Older model No. 6677 (new is 9-6677) fixture. Can sharpen from 1/8 to 5/8. Have another and just dont need it taking up space in my fixture cabinet. clean and in great shape. $25.00 Cash and Pick-up only Mon.- Fr...

  • Flood Lights With Stand
    TOOLS - Mill City (Oregon) - April 15, 2017 25.00 $

    Flood Lights With Stand ⭕ Flood lights with stand. Comes with an extra light $25 If interested email phone number and I will contact you. Phone number ✆ +1 503-306-2700 Mill City, Oregon

  • Delta Scroll Saw $90 OBO. Will Sell Parts.
    TOOLS - Marylhurst (Oregon) - April 15, 2017 1.00 $

    Delta Scroll Saw $90 OBO. Will Sell Parts. ⭕ Delta 16 scroll saw works needs the clamp that holds the blade in place. We will also sell parts individually. Phone number ✆ +1 458-782-6471 Marylhurst, Oregon

  • ShopBot CNC Router
    TOOLS - Ritter (Oregon) - April 14, 2017 14000.00 $

    ShopBot CNC Router ⭕ 2006 ShopBot PRTalpha 48x96 CNC 3 axis Router, closed loop operation. Cutting Area (X) 8+, (Y) 4+,  (Z) 6     This CNC Machine has been well cared for,  It was set up in a home-shop, in a heated area downstairs. It still looks an...

Comments

    Leave your comment (spam and offensive messages will be removed)